|
|
BULK PACK KIT with dynamat Xtreme for custom installations |
 Contents: (9) 18"x 32" (9) 457mm x 812mm* pieces of Dynamat Xtreme
Application: Use on rear decks, doors, floors and the floor of your trunk to get more bass, more music, lower road noise and better sound.
|
|
|
|
|
|
|
DYNASHEILD SPRAY KIT lets you reach close areas |
 Contains one 10.5 oz spray can of Dynashield for use on doors, fenderwells, undercarriage, inside speaker enclosures and other hard to reach areas.
|
|
|
|
|
|
|
DYNAXORB Absorb, diffuse & attenuate speaker back-wave |
 Back wave distortion, a common problem with every speaker, occurs when your speaker sends the same sound out the back as it does out the front! If this rear sound wave energy is allowed to bounce back and return to the speaker, it interferes with the speaker’s ability to operate properly causing back-wave speaker distortion. Dynaxorb eliminates back-wave distortion using Sonic Stealth Technology™. Dynaxorb absorbs, diffuses and attenuates the sonic energy directed towards it. Removing back-wave interference from the speaker allows every speaker to produce the full quality potential it was designed for, and delivers all the sound you paid for!
Package contains two 6"x 6" x .025 Dynax-orb squares and a tube of cyanoacrylate
|
|
|
|
|
|
|
ECONOMY ROLLER TOOL ensuring proper ashesion |
 The Economy Roller is perfect for simple applications.
Contents:1 1/8" solid wood roller,
Thick, plated steel frame
Hardwood Handle
Water & Rust Resistant
Economical tool for applying Dynamat and ensuring proper adhesion
|
|
|
|
|
|
|
HEAVY DUTY ROLLER TOOL to esure proper professional adhesion |
 The Professional Roller is best for more complex applications.
Contains: 2" Solid Rubber Roller
Thick, Plated Steel Frame
Soft, Rubber Roller will not scratch surface
"Comfort Grip" Hardwood Handle
Water & Rust Resistant
Application: Professional tool for applying Dynamat and ensuring proper adhesion with professional-looking results
|
|
|
|
|
|
|
ORIGINAL WEDGE PAK KIT contains one piece 4 sq. ft |
 Kit contains one 18" x 32" pieces of Dynamat Original for general use on rear decks, doors, floors and the floor of your trunk.
Part Number: # 10125
Name: Dynamat Original Wedge Pak
Contents: (1) 18"x 32" (1) 457mm x 812mm* pieces of Dynamat Original
Application: Use on rear decks, doors, floors and the floor of your trunk to get more bass, more music, lower road noise and better sound.
|
|
|
|
|
|
|
TRUNK KIT maximizes bass and reduces road noise |
 During Sound Pressure Level (SPL) competitions, contestants physically hold the vehicle body panels to increase SPL and produce better sound. As the car body is pressurized, the body panels rattle and balloon, but the SPL may not increase.
Adding Dynamat to the vehicle--especially the trunk--results in higher SPL. Dynamat is the easiest-to-apply, thinnest and lightest material for adding sound pressure reinforcement to your car's body. When the panels don't rattle and balloon, you get higher SPL and tighter, louder bass! For more information, click the Sound dBates link below.
Original Kit contains 3 18" x 32" pieces for the trunk floor to maximize bass and reduce road noise
Kit also contains 2 18" x 32" Xtreme pieces for the trunk side panels and trunk lid
|
|
|
|
|
|
|
XTREME DOOR KIT reduces road noise |
 Why does your car stereo sound louder when you pull off the freeway and come to
a stop? Road noise steals much of the listenable portion of your music. At 70
mph, a typical automotive noise level of 85 dB leaves you with only 20 dB of
listenable music. Applying Dynamat creates a "sonic barrier" restoring 3, 6, even
12 dB of lost dynamic range. Gaining just 3 dB doubles your effective amplifier
power. And that means you hear more music. >> Show me proof
Dynamat Door Kits come in two levels of performance. The Original Door Kit offers
the best value for the money. The Xtreme Door Kit controls vibration four times
better than Dynamat Original and requires no heat for installation, which makes the
Dynamat Xtreme Door Kits a great choice for do-it-yourselfers
Kit contains four 12 x 36 pieces of Dynamt Xtreme to reduce road noise
|
|
|
|
|
|
|
XTREME LICENSE PLATE KIT stop rattling |
 Contains one 4" x 10" piece of Dynamat Xtreme to stop lecense plate rattling.
Dynamat is a thin, flexible material that stops vibrational noise and distortion at the source. Apply Dynamat between you and the harsh automotive environment to ensure maximum enjoyment.
|
|
|
|
|
|
|
XTREME SPEAKER KIT elimates speaker panel distortion |
 Even the best new speakers cause speaker panel distortion. Home audio
speakers typically come in well crafted, heavy boxes to eliminate this distortion--a
solution that is impossible (or at least impractical) in your car. For your car,
Dynamat is the solution. Applying Dynamat to the car door surrounding your
speakers eliminates speaker panel distortion by transforming the flimsy sheet
metal into a solid non-resonant baffle. Dynamat improves mid-bass performance
and stops vibration rattles and squeaks. Your stereo will sound its very best with
Dynamat.
Dynamat Speaker Kits come in two levels of performance. The Original Speaker
Kit offers the best value for the money. The Xtreme Speaker Kit controls vibration
four times better than Dynamat Original and requires no heat for installation, which
makes Xtreme Speaker Kits a great choice for do-it-yourselfers.
Kit contains two 10" x 10" pieces of Dynamat Xtreme to be used when mounting your speakers to a metal baffle like a car door or rear deck lid
|
|
|
|
|
|
|
XTREME WEDGE PAK KIT for custom installations |
 Contains 1 Piece 4 sq. ft. of Dynamat Xtreme
Eliminates Speaker Panel Distortion
Reduces Road Noise
Reduces Rattles and Improves SPL
4 times the damping power of other brands
Apply
On Quarter Panels
On Trunk lid
On Roof
Behind Your Speakers
On Rear Deck
On Car Doors
On Floor
|
|
|
|
|
